Arzamit-5 solution
- 450 KZT/kg. - from 2500 kg.
Arzamit - 5 - it heat - conducting waterproof putty is intended for anticorrosive protection of the equipment and building constructions as knitting when lining the equipment and facing building constructions piece chemically resistant materials (ceramic acid - resistant tile, acidproof brick, etc. ), and also for seal of seams.
Arzamit - 5 putty is made in the form of two components (solution and powder) and has to possess properties of self - hardening.
The ratio of the delivered components (rastvor: poroshok) has to make from 0, 6: 1, 0 to 1, 0: 1, 0 mass parts.
Arzamit - 5 putty cannot be applied directly on metallic or concrete surface as because of the acid hardener which is contained in its structure there will be corrosion of the protected surface and the covering will exfoliate.
The covering is applied on the surface painted by epoxy EP - 0010 filling or epoxy compound on the basis of ED - 20 pitches or on impenetrable underlayer: bituminous ruberoid, to rubber, PSG polyisobutylene. For increase in adhesion recommend to enter graphite powder into final coat of prime coat.
Works are performed at temperature not lower than + 15 ° C! ! ! When facing floors tiles less than 30 mm thickness of subtiled layer should not exceed 5 mm as owing to the shrinkable phenomena there can be deformation and flaking of covering. If the big thickness of subtiled layer is necessary, facing needs to be spread on silicate coupler.
Packaging:
Arzamit - 5 solution is delivered in barrels on 250 kg and 100 kg.
Arzamit - 5 powder is delivered in bags on 25 kg.
Hraneneniye conditions:
Components of putty store in densely closed container of manufacturer at temperature not higher than + 25 ° C in the conditions excluding hit of moisture and direct sunshine far from heating devices.
Before application of Arzamit solution should be sustained at temperature 15 - 20os not less than 24 hours in case of storage at subzero temperature! ! !