Glue 88-CA, Glue 88-NP
- 1750 KZT/kg. - from 1950 kg.
Glue 88 - CA is intended for gluing by cold way of rubbers on the basis of general - purpose rubbers, the polyisobutylene plates of PSG to different materials
- Structure
Glue 88 - CA represents solution rubber mix and phenolformaldehyde pitch in ethyl acetate mix with nefrac.
Viscous colloidal solution, color from gray - green to beige.
It is homogeneous on consistence. Sludge formation is possible.
- Properties
Mass fraction of solid residue of glue | 24±3% |
Funnel viscosity on the VZ - 246 viscometer | 10 - 40 with |
Anchoring strength of 56 rubber with steel of Art. 3 or aluminum alloy: | |
In 24 hours after pasting | |
- when flaking | not less than 2,31 (2,36) N/mm (kgf/cm) |
- at separation | not less than 1,09 (11,0) MPas (kgf/cm2) |
In 48 hours after pasting | |
- when flaking | not less than 2,60 (2,64) N/mm (kgf/cm) |
- at separation | not less than 1,39 (14,20) MPas (kgf/cm2) |
The products which are stuck together by Glue 88 - CA (with sealing of end faces and edges), can be operated in sea and sweet water, and also in the environment of air, at temperature from - 50 to + 60 °C.
Glue 88 - CA does not cause corrosion of steel and aluminum alloys, does not form toxic connections in the air environment.
- Storage and application
Glue shelf - life — 6 months in hermetically closed container at temperature from 0 to 20 °C in the special room intended for storage of flammable materials.
Glue 88 - CA is applied to gluing by cold way of rubbers on the basis of general - purpose rubbers, the polyisobutylene plates of PSG to metals, glass, concrete, tree, rubber and other surfaces.
4. Packing
Plastic barrels on 50 liters, capacity 39 - 45kg.